A commonly asked question is: What is Superficial Velocity and when do I use it? If a fluid flows through a region that is occupied by either fixed structures (a porous region, pipe rack, catalyst bed, etc...), or shares the channel with other fluids (e.g. gas-liquid flow), there are two ways to describe the fluid...
Archives for 2012
(Part 2) 10 Useful Tips on selecting the most appropriate multiphase flow CFD models
As we discussed in our previous post, the first step when tackling a multiphase CFD problem is to identify the key characteristics of your physical system. Once you've done this (using our checklist if you are still new to multiphase CFD), you can begin to make informed decisions on what multiphase modelling approaches to use....
Webinar: Overview & Recent Advancements in Multiphase Flow Modelling with Dr. Markus Braun, ANSYS Inc
In advance of his visit to Australia in December, LEAP Australia is pleased to announce a webinar to be conducted by Dr. Markus Braun on Wednesday November 14th at 4pm AEDT (Syd/Mel daylight savings time). This webinar will provide an overview of multiphase flow modelling techniques and discuss recent advancements that impact the use of...
Learn from the Expert: Training in Multiphase Flow Modelling with Dr. Markus Braun, ANSYS Inc.
LEAP Australia is pleased to announce a visit to Australia by Dr Markus Braun, Team Leader, Multiphase Development, ANSYS Inc. Dr. Braun will be presenting a two-day course in Melbourne on Multiphase Flow Modelling, in conjunction with his visit to the 2012 CSIRO Conference on CFD in the Minerals and Process Industries. The training will be...
Webinar: Recent Advancements in Turbulence Modelling with Dr. Florian Menter
As part of the visit to Australia by Dr Florian Menter, world-recognised expert in turbulence modelling, LEAP Australia is pleased to announce a webinar to be held on Thursday Aug 30th at 11am AEST. This webinar will provide an overview of recent advancements in turbulence modelling and is being held for those customers unable to...
10 key points covered in our CFD Meshing Tips & Tricks webinar
A quick thanks to the large number of customers in Australia and New Zealand who attended our July webinar on ANSYS CFD Meshing Tips & Tricks. We've had many enquiries from people wanting to know more, so we thought we'd break the content down into the 10 key points below. If you want more information on any specific...
Top Australian Design Award goes to Deepsea Challenger submersible
LEAP Australia wishes to congratulate Finite Elements Pty Ltd on their impressive use of ANSYS simulation technology during the design and testing of James Cameron's Deepsea Challenge submersible vehicle, which successfully completed its historic expedition to the Mariana Trench’s lowest point, the Challenger Deep, on March 25, 2012. The Deepsea Challenger submersible became the first...
Influence of CFD Technology on London Olympic Games
Many of you may already have detailed knowledge of the use of CFD in your area of expertise, but it is not often that as a CFD community we can all unite in appreciation of a common group of applications that we can all relate to. With the London 2012 Olympic Games fast approaching, we felt...
Tips & Tricks: Turbulence Part 2 - Wall Functions and Y+ requirements
Learn from the Expert: Turbulence Training with Dr. Florian Menter
Dr. Menter is a world-recognised expert in turbulence modelling.
He developed the widely used Shear-Stress Transport (SST) turbulence model, which has set a milestone in the accurate prediction of aerodynamic flows. He has also contributed to the formulation of one-equation turbulence models, advanced near wall treatment of turbulence equations, transition modelling and unsteady flow models. He has been in charge of the turbulence modelling program at ANSYS for more than 15 years and has been involved in a wide range of industrial modelling challenges.
